Space Launch · 2026-11-20
Relativity Space Terran R: The 3D-Printed Rocket's Second Stage Just Cleared Structural Tests — Ahead of Its First Launch
They built a rocket using 3D printers. It almost worked. So they cancelled it — and started printing something twice as big.
That's Relativity Space. And this week, the second stage of their new vehicle — Terran R — passed the structural qualification tests at NASA's Stennis Space Center. That means one thing: the first launch is getting close.
The story of how we got here is stranger and more interesting than most people know.
What does a "3D-printed rocket" actually mean?
It means what it sounds like — except the printer is 10 feet wide, runs on metal instead of plastic, and builds parts of a rocket that have to survive forces that would shred most structures.
Relativity built a machine called Stargate — one of the largest metal 3D printers ever constructed. Instead of machining hundreds of individual panels, welding them together, and assembling sub-components built in factories across the country, Relativity prints entire rocket body sections in one continuous process. No seams. Fewer failure points. And a parts count that makes aerospace engineers stop mid-sentence.
That parts-count comparison is the one that changes the conversation. A hundred-to-one reduction isn't an incremental improvement. It's a completely different philosophy of manufacturing — and of what a rocket company even is.
Who are the people behind this?
Tim Ellis and Jordan Noone founded Relativity Space in 2015. Both were in their early 20s. Ellis had worked at Blue Origin. Noone had worked at SpaceX. They had seen from the inside how the giants of the industry built rockets — and they had a different idea.
Their pitch was straightforward: software is eating every other industry. Manufacturing should eat rocketry. If you reduce a rocket to roughly 1,000 parts and print them on demand, you remove almost every bottleneck between concept and launch. No complex global supply chain. No years-long production schedules waiting on specialized suppliers. Just raw metal, a printer, and software directing it.
Investors listened. Relativity raised over $1.3 billion — one of the largest fundraises for a private launch company outside of SpaceX and Blue Origin.
What happened to Terran 1 — and why did they scrap it?
Their first rocket was Terran 1. A small vehicle, 35 metres tall, designed to carry about 1,250 kilograms to low Earth orbit. The small-satellite market was booming. The concept made sense.
Terran 1 launched on March 8, 2023, from Cape Canaveral. The first stage lit all nine engines and flew perfectly — the printed structure held under the most violent loads a launch vehicle experiences. Then the upper stage failed to ignite. The rocket never reached orbit.
What Relativity did next is the more revealing part of the story.
They didn't retry. They didn't fix the upper stage and attempt again. They announced they were cancelling Terran 1 entirely — and going straight to Terran R. A much bigger, fully reusable rocket designed to compete directly with the Falcon 9. Where Terran 1 was a proof of concept, Terran R is the actual business.
What exactly is Terran R?
Terran R is what a rocket looks like when you design it from scratch with modern manufacturing and no legacy constraints.
It's fully reusable — both stages return and land, like a Falcon 9 (which only recovers its first stage). It burns liquid oxygen and liquid methane — the same propellant combination SpaceX chose for Starship, favoured because methane stores more easily and could theoretically be manufactured from resources found on other planets. And most of the structure is printed.
What does "structural qualification" actually mean?
That phrase sounds bureaucratic. It isn't.
Before any rocket can fly, every component must prove it can survive the forces it will face during flight — and then some. That means physically stressing the hardware beyond what it will experience in operation: pressurizing tanks toward their structural limits, bending sections to test flex tolerance, vibrating systems to verify nothing shakes loose at the worst moment.
Relativity completed these tests on Terran R's second stage at Stennis Space Center in Mississippi — one of the most critical rocket test facilities on Earth, where NASA has tested engines going back to the Saturn V programme. The hardware passed. That clears the second stage for flight.
Combined with propulsion development work already completed, Terran R is now approaching the final phase before its first launch attempt. You can track live satellite activity from every active launch provider — including the constellations Terran R is ultimately designed to service — on the SkyLens live tracker.
Why does another rocket company matter when SpaceX already exists?
It's the right question. Falcon 9 has launched over 300 times. It's reusable, reliable, and cheap enough that it has driven legacy providers out of the commercial market entirely. Why should anyone care about Terran R?
Because the next generation of space infrastructure — satellite internet constellations, in-orbit manufacturing, lunar logistics, government resiliency — requires not dozens of launches per year but hundreds. No single provider can fill every slot. And the countries, agencies, and companies that do not want their space access dependent on one American company are actively funding alternatives.
Terran R is one of only a handful of vehicles in development that could plausibly compete on cost, cadence, and payload. The 3D-printing advantage isn't about being clever for its own sake. If a launch vehicle factory is essentially a building full of Stargate printers fed by software, you can spin one up faster than any conventional production line, adapt the vehicle design between runs, and scale output without hiring thousands of specialist machinists. That matters when demand is measured in hundreds of flights per year.
Is 3D-printed metal actually strong enough for orbital rockets?
This is the correct skeptical question. And the honest answer is: we have real data, not just theory.
3D-printed metal components have been flying on rockets for years — SpaceX, Rocket Lab, and others all use additively manufactured parts. But those are components. Relativity is printing primary structure.
Terran 1's first stage — the part that worked — was printed. It lit nine engines simultaneously, survived maximum aerodynamic pressure, and completed a nominal first-stage flight. That is the most important data point Relativity has, and it is why they had the confidence to bet everything on Terran R.
The question is no longer whether printed metal can survive a rocket launch. It's whether Relativity can operationalize it at the scale, reliability, and cadence that commercial launch demands. SpaceX didn't become SpaceX after one successful test. It took years of flights and failures to get there. Terran R hasn't launched yet — that is the only honest baseline. What this week's structural qualification does is remove one more "maybe" from the list of things that could stop it.
Tim Ellis and Jordan Noone start Relativity Space; the idea: replace conventional aerospace manufacturing with 3D printing
Relativity reveals its metal additive manufacturing system — one of the largest of its kind ever built
First stage performs nominally on its first flight; upper stage anomaly prevents reaching orbit
Relativity cancels Terran 1 program entirely; commits all resources to Terran R
Terran R second stage passes structural testing at NASA Stennis Space Center
First Terran R flight now one step closer; propulsion qualification and vehicle integration remain
The bigger picture
Relativity Space's story is about more than one rocket. It's a test of whether the manufacturing revolution that transformed computing, automotive, and consumer goods can reach aerospace — where the production runs are small, the tolerances are extreme, and the consequences of failure are measured in mission loss and human lives.
If a rocket factory really can be a building full of printers run by software, the barriers that have kept the launch industry a club of a few powerful nations and companies start to come down. That is a genuinely significant shift — if it works.
Whether Relativity executes on that vision remains an open question. The hardware has passed its structural tests. The engines have been developed. The first launch will answer the question that engineering tests alone cannot: does it actually fly?
Keep up with every milestone in the commercial space race on the SkyLens blog, and explore the full picture of what's currently in orbit — from every active provider — on the SkyLens live tracker.
SkyLens editorial — live CelesTrak + NASA/JPL data (15927 objects)
Related stories


